Indium Shot:
Shot are round or tear-dropped shaped pieces ofmetal that are typically used to weight quantities of other alloys, fill vapor deposition crucibles or fill anode baskets with indium for electroplating.
For tear-dropped shaped shot, the typical diameter of the body is approximately 108" (3.175mm) and the length of the tail can vary depending on various parameters, such as the surface tension of the alloy.
Round shot is used to maximize the pack density in deposition cruciels by 15-20%. This option can increase throughput by decreasing downtime caused by source materials depletion. Typical round shot diameter is 1-3 mm. Please call for a quote on round shot.
-
High Purity 6N Indium ShotIPN: Shoti6-47506-1kgGJ
Price: $1165.00
We produce 6N material with impurities held to less than 100 ppb/weight as analyzed by OES. 6N (and often 5N) indium is selected when the user's application offers enough flexibility to allow the balancing of device performance with material cost.
Size: .125" Diameter approx; Random Sized Teardrop Shaped Details… -
High Purity 6N5WCI Indium ShotIPN: Shoti6-47567-1kgGJ
Price: $1910.00
Our 6N5WCI (with controlled impurities) indium is refined for use in critical bulk crystal growth and in epitazial processes including molecular beam (MBE), liquid phase (LPE), and vapor phase (VPE) epitazy 6N5WCI is tailored for applications requiring the stringent control of impurities which, until now, only a 7N purity level may have provided at higher cost. This is accomplished by holding total metallic impurities to less than 500 ppb/weight (by GDMS), with particular attention given to maintaining low levels of elements known to be detrimental to III-V device performance.
Size: .125" Diameter approx; Random Sized Teardrop Shaped Details… -
Pure Indium Shot - Minimum Purity: 10 ppmIPN: Shoti5-47505-1kGJ
Price: $894.00
Typical Indium Analysis
99.999%
PPMWT
Fe : 0.5
Ni : 1.0
Cu : 1.0
Cd : 1.0
Pb : 2.0
Sn : 2.5
Ti : 1.0
Analysis by OES
* Please note that these are typical ppm levels, and do not represent maximum, minimum, or lot specific levels.
If you have specific requirements for one or two elements, we would be pleased to review our ability to accommodate those requirements. Please submit a request for quotation, outlining your specific requirements.
Size: .125" diameter, Random sized; Teardrop Shaped Details… -
Pure Indium Shot - Minimum Purity: 100 ppmIPN: Shotic-47504-1kPJ
Price: $880.00
Typical Indium Analysis
99.99%
PPMWT
Fe : 1-2
Ni : 2-6
Cu : 2-6
Cd : 5-10
Pb : 10-30
Sn : 10-25
Ti : 1-4
Analysis by OES
* Please note that these are typical ppm levels, and do not represent maximum, minimum, or lot specific levels.
If you have specific requirements for one or two elements, we would be pleased to review our ability to accommodate those requirements. Please submit a request for quotation, outlining your specific requirements.
Size: .125" diameter, Random sized; Teardrop Shaped Details… -
Pure Indium Shot - Minimum Purity: 1000 ppmIPN: Shotic-47507-1kPJ
Price: $874.00
Typical Indium Analysis
99.9%
PPMWT
Fe : 10-20
Ni : 5-20
Cu : 5-30
Cd : 50-100
Pb : 200-300
Sn : 50-200
Ti : 100-300
Analysis by OES
* Please note that these are typical ppm levels, and do not represent maximum, minimum, or lot specific levels.
If you have specific requirements for one or two elements, we would be pleased to review our ability to accommodate those requirements. Please submit a request for quotation, outlining your specific requirements.
Size: .125" diameter, Random sized; Teardrop Shaped Details…